16 operating Instructions
BEFoRE USING YoUR CoFFEE MAkER
“Clean Group” will appear on the display when the coffee maker needs a
routine cleaning. The “Clean Group” message will disappear after you follow
the Routine Cleaning Instructions on page 32.
A small amount of dripping from the dispensers is normal after drinks are
dispensed.
This coffee maker is designed to make one (in some cases two) hot drink(s)
at a time.
Drink volume may vary due to coffee type, grind time, temperature, tamping
time and pre-brewing time.
For proper operation, clean your coffee maker regularly according to the
cleaning schedule on page 30.
When the coffee maker makes coffee, it dumps the used coffee grounds into
the used coffee ground bin. You must empty out the bin when it becomes
full. “Drawer Full” will appear on the display. See the Routine Cleaning
Instructions on page 32.
The coffee maker purges water into the drip tray to ensure that the water
used for drink making is hot. Empty out the drip tray when it starts to get full.
CAUTIoN
Use only ltered water with a hardness of 4 gpg or lower. See Before
Installing Your Coffee Maker on page 14.
WARNING
on model E24CM75GSS, clean the water tank daily to avoid sickness due to
bacteria growth.
WARNING
Do NoT PUSH ANY BUTToNS oN THE CoNTRoL PANEL UNTIL ALL BoDY
PARTS AND CLoTHING ARE CLEAR oF THE BREWING CoMPARTMENT.
kEEP ALL BoDY PARTS AWAY FRoM THE BREWING CoMPARTMENT
DURING oR IMMEDIATELY AFTER DRINk DISPENSING. HoT LIQUIDS AND
STEAM CAN CAUSE SEVERE BURNS.