Care & Cleaning 37

Decalcification for Model E24CM76GSS (Plumbed Version) with a generic or no filter system

1.For Model E24CM76GSS to be decalcified, the water line must be in an accessible location. The type of fittings and hoses required to connect it depend on the type of installation.

2.Use an Electrolux ACCFILT-24 filter kit and an Electrolux ACCKITA-24 flushing cartridge.

3.When the coffee system is pulled out all the way, there is approximately a three inch space to reach behind.

4.Turn off the water supply to the coffee system and pull it out from the cabinet.

5.Push the Hot Water button. Wait for the water to stop. Repeat this process twice to remove air.

Divider

Flushing Cartridge

Hot

Water

6.Remove the divider insert from the flushing cartridge with a small screw driver.

7.Dissolve one packet of Puly Decalcifying Powder in 12 ounces of warm water. Use a measuring cup.

8.Fill the flushing cartridge with solution and top it off with water. Reinstall the divider insert.

9.Install the flushing cartridge into the filter head. Keep it upright so no water runs out.

10.Disconnect the far end of the water hose that connects to the coffee maker from the water supply.

11.Connect the hose to the filter head outlet (see the arrow on the head)

12.Connect the house water supply to the inlet on the filter head.

13.Turn on the water supply.

Filter

Head

Flushing Cartridge

Page 37
Image 37
Electrolux E24CM75GSS manual Divider Flushing Cartridge