16Installation
REMOVING THE OVEN DOOR
Open the door to its fully opened position. Rotate the catch over the retaining arm on each hinge. Lift the oven door to about a 30 degree angle from the horizontal position. Pull the door away from the oven while continuing to lift.
WARNING
Do not attempt to disengage the hinge catches with the door removed from the oven. The hinge springs could release causing personal injury.
Do not lift or carry the oven door by the handle door.
Figure 4
To remove oven door,
rotate catch as shown.
RE-INSTALLING THE OVEN DOOR
Grasp the oven door on opposite sides and lift it until the door hinges are aligned with the openings in the oven frame. Holding the door at about a 30 degree angle from the horizontal, slide the hinges into the openings until the bottom hinge arms drop fully into the two hinge receptacles. Lower the door to the fully opened position, and then rotate the two hinge catches toward the oven.
Open and close the door completely to ensure that it is properly installed. Peel off the protective layer of plastic that covers the door panel.