Conversion To LP Gas 21
INSTRUCTIONS FOR CONVERTING RANGE
OPERATION TO OPERATE ON LP GAS
INSTALLATION AND SERVICES MUST BE PERFORMED BY
A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR’S USE. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING
This conversion kit must be installed by a qualified service technician in accordance with the manufacturer’s instructions and all applicable codes and requirements of the authority having jurisdiction. Failure to follow instructions may result in fire, explosion or production of carbon monoxide causing property damage, personal injury or loss of life. The qualified service agency is responsible for the proper installation of this kit. The installation is not proper and complete until the operation of the converted appliance is checked as specified in the manufacturer’s instructions supplied with this kit.
CAUTION
Before proceeding with the conversion, shut off the gas supply before disconnecting electrical power to the range. Be sure power supplies are off before installing the conversion kit. Failure to do so could cause serious bodily injury.
TOOLS REQUIRED FOR L.P. CONVERSION:
3/8” AND 5/8” OPEN END WRENCH
1/8” WIDE FLAT BLADE SCREWDRIVER
PHILLIPS SCREWDRIVER
9/32 NUT DRIVER
5/32 NUT DRIVER 7mm NUT DRIVER
