Conversion To LP Gas 23
HOW TO CONVERT THE RANGE FOR USE WITH LP/PROPANE GAS
1. CONVERT THE PRESSURE REGULATOR
To access the gas regulator, pull the range away from the cabinet wall. The gas regulator is located at the bottom right corner of the range.
WARNING
a. Electrical shock hazard can occur and result in injury or death. Disconnect electrical power to the range before servicing. Do not remove regulator or allow it to turn during servicing.
b. Unscrew the cap from the regulator. Do not remove the spring from the regulator (see Figure 1)..
c. Unscrew the plastic insert from the cap (see Figure 2 and 3). Turn the insert around so that the longer stem is facing toward the cap (see Figure 4). Screw the insert into the cap.
d. Replace the cap on the regulator.
Figure 1
Figure 3
Position for NG
Figure 2 | Figure 4 |
|
Position for LP
