Electrolux EI36HI55KS manual Location requirements, Location Requirements, Product dimensions

Location requirements

Location Requirements

IMPORTANT: Observe all governing codes and ordi- nances. Have a qualified technician install the hood insert. It is the installer’s responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located behind the left filter on the rear wall of the hood

Installation 1982 (Manufactured Home Sites, Commu- nities and Setups) ANSI A225.1/NFPA 501A, or latest edition, or with local codes.

Cabinet Dimensions

insert.

The hood insert location should be away from strong draft areas, such as windows, doors and strong heat- ing vents.

Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance. The hood insert must be surrounded by a custom built enclosure with hood cabinet capable of supporting 75 lb (34 kg).

Grounded electrical outlet is required. See “Electrical Requirements” section on page 5.

All openings in ceiling and wall where canopy hood will be installed must be sealed.

For Mobile Home Installations

30” (76.2 cm) for 30” models 36” (91.4 cm) for 36” models 48” (121.9 cm) for 48” models

Hood insert cabinet must be

capable of supporting

75 lb (34 kg) “X” bottom of canopy to cooking surface

22” (55.9 cm)

Hood insert depth

The installation of this hood insert must conform to the Manufactured Home Construction Safety Standards, Title 24 CFR, Part 328 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or when such standard is not appli- cable, the standard for Manufactured Home

IMPORTANT:

Minimum distance “X”: 24” (61 cm) from electric cooking surfaces.

Minimum distance “X”: 30” (76.2 cm) from gas cooking surfaces.

Suggested maximum distance “X”: 36” (91.4 cm).

Product dimensions

8”

(31.4 cm)

16” (12.2 cm)

(29.2 cm)

16”

(12.8 cm)

36” & 48” models wiring knockout

22” (56 cm) for 30”models

271/2”(70 cm) for 36 & 48”models

245/16”(61.8 cm) for 30” models 30” (75.8 cm) for 36 & 48” models

30” (76.2 cm) for 30” models 36” (91.4 cm) for 36” models 48” (121.4 cm) for 48” models

97/8” (25.11 cm)

30” model

wiring knockout

11” (28 cm)

11” (28 cm) for 30” model

10 1/8” (25.7 cm) for 36 & 48” models

15” (38 cm) for 30” models 18” (45.2 cm) for 36” models 24” (61 cm) for 48” models

22” (55.9 cm)