Problem Possible cause Remedy
F11 appears in the clock display The meat probe has short cir-
cuit or the plug of the meat
probe is not tightly in position in
the socket
Insert the plug of the meat
probe as far as it will go into
the socket on the side wall of
the oven
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
INSTALLATION
Warning! Refer to "Safety information"
chapter.
Important! The built-in unit must meet the
stability requirements of DIN 68930.
114
594
594
567
584
546
541
10
30
20
10
21
590
560 min.
530 min.
550 min.
200 cm2
140
max. R1200 mm
130
electrolux 19