8 gas requirements/setting up the barbecue/fitting the lid or hood electrolux integrated barbecue
Gas requirements | Fitting the slimline lid or roasting hood | ||
Natural Gas requirements | Fitting of slimline lid | ||
såå | 4HEåENCLOSUREåMUSTåBEåCONSTRUCTEDåSOåTHATåACCESSåCANå | så 5NPACKåTHEåSLIMLINEåLID | |
| be gained to the Natural Gas regulator at all times. | så | 2EMOVEåSIDEåSCREWSåFROMåBARBECUEåTRIMåSURROUNDåUSINGå |
så | &ORå.ATURALå'ASåTHEåGASåSUPPLYåISåREQUIREDåTOåBEå |
| allen key supplied. |
| connected to 1.2m flexible hose supplied and therefore | så | &ITåBRACKETSåTOåTRIMåSURROUNDåWITHåTHEåSAMEåSCREWS |
| must be located within this distance | så | &ITåLIDåTOåBRACKETS |
så | 4HEåmEXIBLEåHOSEåHASåAåQUICKåCONNECTåGASåCOUPLINGå4HEå |
|
|
| corresponding mating fitting will be required at the gas |
|
|
| supply end. |
|
|
så | &ORåPIPEåSIZINGåREQUIREMENTSåFORåSUPPLYåPIPEåREFERåTOå |
|
|
| AS5601. |
|
|
Universal LPG Requirements |
|
| |
warning
så )FåANå,0'åBOTTLEåISåTOåBEåSTOREDåINåTHEåENCLOSUREå under the barbecue unit, it must be isolated from the barbecue unit with a
The enclosure must comply with the requirements of AS5601.
så !3åVENTILATIONåREQUIREMENTSåFORåCYLINDERåSTORAGEåAREå Where of sheet metal or similar impervious construction there shall be ventilation openings at the top and bottom of the enclosure or recess, each opening providing a free area of at least 200cm2 for every cylinder enclosed.
cut hole in non- combustible barrier for hose only
210mm 
front of enclosure removed for clarity
at least 30mm clearanceunder barbecue between bottom of
barbecue and barrier
Setting up the barbecue
Setting up the barbecue in mounting enclosure
så !FTERåTHEåENCLOSUREåHASåBEENåCONSTRUCTEDåASåDESCRIBEDå on page 6, position the assembled barbecue into the
så #HECKåTHATåTHEåBARBECUEåISåLEVELåANDåISålRMLYåSUPPORTED så #ONNECTåTOåGASåSUPPLYå5NIVERSALå,0'åORå.ATURALå'AS å
and leak test.
så &ORålTMENTåOFåTHEåSLIMLINEåLIDåORåROASTINGåHOODåSEEåRIGHT
Fitting of roasting hood
så 5NPACKåTHEåROASTINGåHOOD
så 2EMOVEåSIDEåANDåREARåSCREWSåFROMåBARBECUEåTRIMå surround using allen key supplied.
important
så $UEåTOåTHEåSIZEåOFåTHEåROASTINGåHOOD åITåISåRECOMMENDEDå that two people place the roasting hood into position.
så 7HENålTTINGåROASTINGåHOODåASSEMBLY åTAKEåPARTICULARå care to avoid scratching of the external trim.
så /NCEåINåPOSITION ålXåHOODåASSEMBLYåTOåTRIMåSURROUNDå with same screws.
