Servicing and cleaning the ice dispenser
When necessary, clean the surfaces of the dispenser and the ice container that are accessible from the outside, using only a soft cloth and warm water. Never use cleaning agents with a grinding or aggressive effect.
When necessary, the feeder and the ice container can be cleaned after removal of the surfaces accessible from the outside, using only a soft cloth and warm water.
Ensure that the ice container is thoroughly dry before being
If the system is not to be used for a long period, it is advisable to switch off the ice machine and water supply, empty the ice container and fit the cover supplied over the delivery hole for ice in the door. When
Defrosting
Defrosting is not necessary.
Every 24 hours, the evaporator is defrosted automatically.
Never use a hair drier or other heating appliances to speed up defrosting. Excessive heat may damage the plastic interior, and humidity could enter the electric appliance making it live.
To change the light bulb
The light is switched on automatically when the door is opened. Before replacing the light bulb, disconnect the power plug from the outlet.
Cut the packaging around the bulb socket.
Keep the packaging on to hold the bulb when setting it into the socket. Do not touch the bulb with your bare fingers. Halogen light bulbs are sensitive to grease from the skin.
Use a clear halogen light bulb.
When the appliance is not in use
Disconnect the appliance from electricity supply. Empty all foods and clean the appliance, leaving the doors ajar to prevent unpleasant smells.
If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.
G4 | |
20W/12V | Low pressure |
Electrolux 818 38
10
