
Door Reversal
It is not possible to
Connecting the water hose.
The water coupling is connected to a water tap with an external 3/4 inch thread.
This work is to be carried out by a skilled plumbing installation technician.
The refrigerator is to be connected with a
The water hose must not be cracked, squeezed or be in tight bends.
If you require a longer water hose than that supplied, then a
Before the refrigerator is taken into use in its final location, ensure that the water connection has been correctly carried out, that there is no leakage at the connection to the refrigerator water valve or to the water tap, and that the four spacers are properly in position, see the illustration.
We recommend that the refrigerator is placed on a
When the water system is started for the first time.
The following should be carried out when the refrigerator is correctly connected to the water supply in the building:
Open the tap on the water connection and start up the refrigerator. The ice machine starts automatically. It will start filling with water will start when the temperature is sufficiently low. Do not use ice produced during the first day since there is risk of a slight taste.
Electrical cord
Do not remove the power cord by pulling on its lead, particulary when the product is being pulled out of its niche.
·Damage to the cord may cause a
·In the event of damage to the appliance's main cable, only an authorised service company recommended by the manufacturer or a similarly qualified person may adjust it in order to avoid shock hazard for the user.
Electrolux 818 38
14