Installing the cabinet

When two appliances are placed beside each other, the spacers enclosed in the plastic wrapping should be glued between the appliances. As shown in the illustration.

Make sure that the power plug is not squashed or damaged by the back of the product.

·A damaged power plug may overheat and cause a fire.

Do not place heavy articles or the product itself on the power cord.

·there is a risk of a short circuit and fire.

If the power plug socket is loose, do not insert the power plug.

·there is a risk of electric shock or fire.

To obtain the best performance from the cabinet, ensure:

·the cabinet is placed in a dry, cool place and is not exposed to direct sunlight.

·the cabinet is not placed close to a source of heat, e.g. a cooker or dishwasher.

·the cabinet is level. The cabinet should not lean against any wall. If necessary adjust the

feet using the adjustment spanner supplied.

·there is good air circulation around the cabinet and that the air channels below and behind the cabinet are not blocked. The ventilation space above the cabinet must be at least 4 cm.

The ventilation space can either be

a)directly above the cabinet, or

b)behind and above the top cupboard. In this case,

the space behind the cupboard must be at least 50 mm deep.

Cabinet is placed at a location whose ambient temperature corresponds to the climate classification*, for which the appliance is designed.

*See on the rating plate on the inside of the appliance.

The following table shows which ambient temperature is correct for each climate classification.

Climate

for an ambient temperature of

classification

 

SN

+10°C to +32°C

 

 

N

+16°C to +32°C

ST

+18°C to +38°C

T

+18°C to +43°C

If the cabinet is placed in a corner and the side with the hinges facing the wall, the distance between the wall and the cabinet must be at least 150 mm to allow the door to open enough so that the baskets can be removed.

The power plug must be accessible after installation of the cabinet.

a)

b)

50mm

Electrical connection

Connect the cabinet to a grounded electrical outlet. Voltage: 230 V.

Fuse: 10 A.

Refer to the rating plate on the left inside the cabinet.

Electrolux 818 38 03-01/7

15

Page 15
Image 15
Electrolux EUFG2900X manual Installing the cabinet, Electrical connection