42Care & Cleaning
Starting Self-clean cycle
To set the controls for a Self-Cleaning cycle:
1.Remove the oven racks and the racks supports.
2.Be sure the clock is set with the correct time of day and the oven door is closed.
3. | UPPER |
Select oven by pressing UPPER OVEN OVEN | |
4. | Press CLEAN . |
5. | Press LITE for a 2 hour |
HEAVY for 4 hours.
6. Press START . The “DOOR ” icon will flash.
7. As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the “DOOR ” indicator light will stop
flashing and remain on.
Note: Allow about 15 seconds for the oven door lock to close.
To set the controls for a delayed Self-Cleaning cycle:
1.Follow the instructions above.
2.Press COOK OPTIONS to bring up the cook options items.
3.Press END TIME . The time of day numbers will blink in the display.
4.Enter time of day needed for the end of the cycle (example for “6:00”; 6 0 0 ).
5. Press START .
When the Self-Clean Cycle is Completed:
1.The time of day and “DOOR ” will remain ON.
2.The display will show an “Hot” message while the oven is still too hot to open door.
3.Once the oven has cooled down for 1 HOUR, and the “DOOR ” icon is no longer displayed, the oven door can then be opened.
Stopping or Interrupting a Self-Cleaning Cycle:
If it becomes necessary to stop or interrupt a
1. Press CANCEL .
2.Once the oven has cooled down for approximately 1 HOUR and the “DOOR ” icon is no longer displayed, the oven door can then be opened.
During the
DO NOT force the oven door open. This can damage the automatic door locking system. Use care when opening the oven door after the