If the wiring is extended or a completely new cable fitted a 3-pin 13 amp plug should be fitted. (See Fig.4a). Connect the wires as follows:

BROWN to the Live Terminal. BLUE to the Neutral Terminal.

GREEN and YELLOW to the Earth Terminal.

As the colours of the wires in the mains lead which you fit may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is GREEN and YELLOW must be connected to the terminal in the plug which is marked with the letter 'E' or

by the earth symbol or coloured GREEN or GREEN and

YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter 'N' or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter 'L' or coloured RED.

FIT A 3 AMP FUSE TO THE PLUG HOLDER.

Ensure that the supply cable cannot get caught by the stability bracket.

Fig.4a

Plug in the appliance.

6. PRESSURE TESTING

1The oven injector is used as a pressure test point.

Remove the oven furniture. Remove oven burner box retaining clips (one spring clip from each side) and

remove box front cover. Replace one clip back into the right hand side of the burner box.

Remove oven burner by removing the spring clip from the right hand side of the oven burner and slide burner off injector whilst easing it forward and taking care not to strain the F.S.D. phial.

2.Connect the pressure gauge to the oven injector.

3.Check the supply pressure by turning the thermostat on and one hotplate tap full on and light the appropriate burner. The pressure should be either:-

(i)For Natural Gas 20mbar

(ii)For LP.GasThe pressure must be set to 28 mbar for use on butane or 37 mbar for use on propane.

4.Turn off the taps, disconnect the pressure gauge and replace oven burner and cover, ensuring that the F.S.D. phial is correctly located into the bracket on the burner.

5.Check operation of oven.

7. CHECKING THE GRILL

Place the grill pan containing the grid, with the handle attached, into the grill compartment. Light the grill burner by turning the grill tap to its full on position and pushing the ignition button. As soon as the burner is lit the button can be released.

8. CHECKING THE HOTPLATE

Lift the lid. Fit the burner crowns and caps ensuring that they are correctly seated. Fit the pan supports. Check each of the hotplate burners in turn by turning the hotplate tap to it's full on position and pushing the

ignition button. As soon as the burners are lit the button can be released.

9. CHECKING LID SHUT-OFF DEVICE

1.Lift the lid.

2.Turn one hotplate burner tap to its full on position and push the ignition button.

3.Close lid. There should now be no gas supply to the hotplate and the burner will go out.

4.Turn off the hotplate tap and lift the lid. The gas supply should now be restored to the hotplate. When the tap is turned on.

48

Page 48
Image 48
Electrolux SIG 505 X Pressure Testing, Checking the Grill, Checking the Hotplate, Checking LID SHUT-OFF Device

SIG 505 X specifications

The Electrolux SIG 505 X is a modern, high-performance built-in oven designed to enhance your cooking experience. Combining elegance with cutting-edge technology, this oven stands out for its sleek stainless-steel finish, ensuring it complements any contemporary kitchen decor.

One of the main features of the Electrolux SIG 505 X is its multifunction cooking system. This oven offers a wide range of cooking options, including conventional cooking, fan cooking, grilling, and baking, allowing users to experiment with various recipes effortlessly. The fan cooking feature ensures even heat distribution, which results in perfectly cooked dishes every time, whether you're roasting a chicken or baking a batch of cookies.

The SIG 505 X is equipped with intuitive controls, featuring a digital display that makes setting temperatures and cooking modes straightforward. The user-friendly interface includes touch controls, simplifying navigation through the different cooking settings. Additionally, the oven includes a programmable timer to ensure meals are cooked to perfection, while the delay start function allows you to set cooking times in advance.

Another noteworthy characteristic is the oven's pyrolytic self-cleaning function. This innovative technology burns off food residues at high temperatures, leaving the oven clean without the use of chemical cleaners. This not only saves time on cleaning but also ensures a hygienic cooking environment.

The Electrolux SIG 505 X also prioritizes energy efficiency. It is designed to consume less energy while maintaining high cooking performance, adhering to strict energy-saving regulations. This feature not only helps the environment but also reduces energy bills for the homeowner.

In terms of capacity, the SIG 505 X offers a generous interior space, allowing for the preparation of large meals. The oven's shelves can be adjusted to accommodate various cookware sizes, enhancing its versatility for different cooking needs.

Safety features are an essential aspect of the Electrolux SIG 505 X. It includes a child lock function to prevent accidental operation and heat-resistant doors that keep outer surfaces safe to touch, protecting younger family members.

In summary, the Electrolux SIG 505 X is a standout built-in oven that merges sophisticated design with advanced cooking technology, making it an ideal choice for home cooks of all skill levels. Its versatile cooking options, energy efficiency, and self-cleaning capabilities truly make it a valuable addition to any kitchen.