44 | electrolux | care and cleaning |
4. |
|
|
Turn both lock washers inwards.
5. |
Use the handle to pull the heat exchanger out of the base and carry it horizontally to prevent any remaining water from spilling.
6. To empty the heat exchanger, hold vertically over a
Do not use sharp objects to clean. The heat exchanger could develop leaks.
7.Clean heat exchanger.
It is best to use a brush or to rinse thoroughly with a
8.Replace heat exchanger and lock into place (turn both lock washers outwards until they snap into place).
9.Close door in plinth.
Never operate the dryer without the heat exchanger.
Cleaning the water recirculation valve/filter
If the message Please clean the water recirculation filter is shown in the display, the recirculation filter needs to be cleaned. The valve/filter is placed behind the tank handle - see chapter "Product description".
