hints for test institutes electrolux 55

Hints for test institutes

Parameters possible to be checked by the Test Institutes:

Energy consumption (corrected with final humidity) during the cupboard dry cot- ton cycle with nominal load.

Energy consumption (corrected with final humidity) during the cupboard dry cot- ton cycle with half load.

Final humidity (during Cupboard dry cotton, Iron dry cotton and Cupboard dry Easy care)

Condensation efficiency (corrected with final humidity) during cupboard dry cot- ton cycle with nominal and half load (with valve/filter of the water recirculation system in OFF position).

All the cycles have to be checked in accordance with IEC 61121 (Tumble dryers for household use – Methods for measuring the performance).

Installation

The appliance must be moved in vertical position for transport.

Appliance positioning

It is recommended that, for your convenience, the machine is positioned close to your washing machine.

The tumble dryer must be installed in a clean place, where dirt does not build up.

Air must be able to circulate freely all round the appliance. Do not obstruct the front ventilation grille or the air intake grilles at the back of the machine.

To keep vibration and noise to a minimum when the dryer is in use, it should be placed on a firm, level surface.

Once in its permanent operating position, check that the dryer is absolutely level with the aid of a spirit level. If it is not, raise or lower the feet until it is.

The feet must never be removed. Do not restrict the floor clearance through deeppile carpets, strips of wood or similar. This might cause heat built-up which would interfere with the operation of the appliance.

Page 55
Image 55
Electrolux TK SL5 E user manual Appliance positioning, Hints for test institutes electrolux