Programme option button
Depending on the programme, different functions can be combined. These must
be selected after choosing the desired programme and before depressing the
Start/Pause button.
When these buttons are pressed, the corresponding pilot lights come on. When
they are pressed again, the pilot lights go out.
If an incorrect option is selected, the integrated yellow pilot light of the
Start/Pause button flashes for 3 times and the Err message appears on the
display for some seconds.
Important!
For the compatibility among the washing programmes and the options see
chapter Washing Porgrammes.
Select the Prewash option
Select this option if you wish your laundry to be prewashed at 30°C before the
main wash. The Prewash ends with a short spin in programmes for cotton and
synthetic fabrics, whereas in the programmes for delicate fabrics the water is
only drained.
The relevant light will light up.
Select the Stain option
Select this option to treat heavily soiled or stained laundry with stain remover
(extended main wash with time optimised stain action phase). The relevant light
will light up.
This option is not available with the «Prewash» and with a temperature lower
than 40°C.
Attention! If you wish to perform a programme with the stain option, pour
stain remover into compartment .
Select the Sensitive option
By depressing this button the washing intensity will be reduced. The machine
adds one rinse in the programmes for Cotton and Synthetics. The relevant light
will light up.
This option is recommended for non fast coloured items.
This option is not available with the «Extra Rinse» (Extraspülen/Rinçage plus).
16 Use
132962330_EN.qxd 10/06/2008 14.03 Pagina 16