Electrolux WA GLE S7000 Personalization

13

Use

Personalization

Acoustic signals

The machine is provided of an acoustic device, which sounds in the following

cases:

●at the end of the cycle

●in the event of operating problems

By pressing the «Prewash» and «Stain» buttons simultaneously for about 6

seconds, the acoustic signal is deactivated (except for the events of operating

problems). By pressing these 2 buttons again, the the acoustic signal is

reactivated.

Child safety lock

This function allows you to leave the appliance unsupervised without having the

worry that children might be injured by or cause damage to the appliance.

This function remains able also when the washing machine is not working.

There are two different ways to set this option:

●before pressing the «Start/Pause»: it will be impossible to start the machine.

●after pressing the «Start/Pause» it will be impossible to change any other

programme or option.

To enable (disable) this option press «Stain» and «Sensitive» buttons

simultaneously for about 6 seconds until the icon appears (disappears) on

(from) the display.

132962330_EN.qxd 10/06/2008 14.03 Pagina 13

Contents

Main Page Page Page Contents Page Page Instruction for the user Safety information Prior to using for the first time General safety Installation Use Child Safety Product description Detergent dispenser drawer Control panel First Use 1 2 3 4 5 6 7 8 9 10 Personalization Acoustic signals Child safety lock Daily Use Load the laundry Measure out the detergent and the fabric softener Select the required programme Select the spin speed or the rinse hold option Programme option button Select the Prewash option Select the Stain option Select the Sensitive option Select the Time Saving option Display Duration of the selected programme Delay Incorrect option selection Select the Start/Pause Select the Delay Start Programme progress display Select an additional rinse Altering an option or a running programme Interrupting a programme Cancelling a programme Opening the door after the programme has started At the end of the programme * Stain option can be selected only at the temperature of 40C or higher. ** Washing programmes pprrooggrraammmmee Washing programmes pprrooggrraammmmee Aus/Arrt Programme informations Preparing the wash cycle Sorting out the laundry Temperatures Before loading the laundry Maximum loads Laundry weights Removing stains Detergents and additives Quantity of detergent to be used Degrees of water hardness 30 International wash code symbols 132962330_EN.qxd 10/06/2008 14.03 Pagina 30 International wash code symbols Care and cleaning Descaling After each wash Maintenance wash External cleaning Washing drum Door seal Drain pump Water inlet filter Emergency emptying out Frost precautions Something not working E10 : E20 : E40 : Page Page Techinical Data Consumption value Installation Unpacking A C C B D B Positioning and levelling Water inlet Water-stop device Water drainage Electrical connection Permanent connection Environment concerns Packaging materials Old machine Ecological hints