Electrolux WA GLE S7000 Installation

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all transit devices so that they can be refitted if the

machine ever has to be transported again.

1. After removing all the packaging, carefully lay

machine on it’s back to remove the

polystyrene base from the bottom.

2. Remove the power supply cable and the

draining hose from the hose holders on the rear of the

appliance.

3. With the provided spanner unscrew and

remove the central rear bolt A.

Installation

HEC0008

A

HEC00022

HEC0001

132962330_EN.qxd 10/06/2008 14.03 Pagina 41

Contents

Main Page Page Page Contents Page Page Instruction for the user Safety information Prior to using for the first time General safety Installation Use Child Safety Product description Detergent dispenser drawer Control panel First Use 1 2 3 4 5 6 7 8 9 10 Personalization Acoustic signals Child safety lock Daily Use Load the laundry Measure out the detergent and the fabric softener Select the required programme Select the spin speed or the rinse hold option Programme option button Select the Prewash option Select the Stain option Select the Sensitive option Select the Time Saving option Display Duration of the selected programme Delay Incorrect option selection Select the Start/Pause Select the Delay Start Programme progress display Select an additional rinse Altering an option or a running programme Interrupting a programme Cancelling a programme Opening the door after the programme has started At the end of the programme * Stain option can be selected only at the temperature of 40C or higher. ** Washing programmes pprrooggrraammmmee Washing programmes pprrooggrraammmmee Aus/Arrt Programme informations Preparing the wash cycle Sorting out the laundry Temperatures Before loading the laundry Maximum loads Laundry weights Removing stains Detergents and additives Quantity of detergent to be used Degrees of water hardness 30 International wash code symbols 132962330_EN.qxd 10/06/2008 14.03 Pagina 30 International wash code symbols Care and cleaning Descaling After each wash Maintenance wash External cleaning Washing drum Door seal Drain pump Water inlet filter Emergency emptying out Frost precautions Something not working E10 : E20 : E40 : Page Page Techinical Data Consumption value Installation Unpacking A C C B D B Positioning and levelling Water inlet Water-stop device Water drainage Electrical connection Permanent connection Environment concerns Packaging materials Old machine Ecological hints