Electrolux WTM250SLA, WTM250ERA, WTM250ELA, WTM250ELB manual Easy to Install, Functional Zones

Electrolux Dishwashing

Rack Type WTM250

The Electrolux Dishwashing range is produced for customers with the highest conceivable demands for good efficiency, economy and ergonomics for dishwashing operation. The product range comprises glasswashers, undercounter dishwashers, hood type dishwashers, rack type dishwashers, flight type dishwashers and pot and pan washers. The rack type dishwasher range is designed to be easily connected with the equipment included in the Electrolux Handling System range, to create a functional and ergonomic dishwashing area. The rack type dishwasher WTM250 has a capacity up to 250 racks per hour with 2 speeds (variable on-site). The range consists of 6 electrically or steam heated models, available with or without Energy Saving Device (ESD).

EASY TO INSTALL

•Solid 3mm square stainless steel sub-frame with bolt-together construction that can be delivered assembled or in modules to be connected on site.

•Stainless steel wash pumps ideal for heavy duty usage installations.

•Brass inlet valves as standard for extra reliability at high incoming water temperatures.

•All rear positioned water tubes in stainless steel.

•Only one cable for electrical connection.

•Electrical and water connections centralised in one area.

•Service from the front and from the side.

•Pre-arrangements for automatic detergent dispenser, energy management device and HACCP implementation (both basic as well as integrated system).

FUNCTIONAL ZONES

•Separate 100 litre pre-wash zone with 1,1kW pump where first soil scrapping is performed. Separate zone, at less than 35°C, without chemicals for maximum dirt removal and incorporates automatic partial drain.

•Power wash zone with 150 litre wash tank with 2,2kW wash pump supplying upper was arms, 1,1kW wash pump supplying lower was arms. Maximum water contact wash arms for best possible washing result.

534115

•Separate wash and rinse zones

so detergent does not mix with the rinse aid and is always active.

•Rinse area equipped with the DUO-rinse system where the first ramp is filled by the re-used final rinse water, to eliminate any trace of detergent, and the second ramp is filled by hot fresh water to guarantee sanitation of the items.

•Atmospheric boiler combined with the rinse booster pump for perfect rinsing performances in terms of sanitation, energy saving, independence from the water pressure on the network. Incorporates non-return (air gap class A) valve.

•As optional extra the WTM250 can be equipped with a drying zone for fast and efficient drying.