Making/Answering Calls | Panasonic KX-T2378JXW instruction

PQQX13204YA-03 01.11.28 8:36 AM y [ W 31

Making/Answering Calls

Make sure to install the batteries.

Line Buttons and Indicators



	VOLUME (_), (^)
	(SP-PHONE/HEADSET)		and Indicator
1 Press the line button to select the telephone line.
2	Press (SP-PHONE/HEADSET)to make or answer a call.
	³The line indicator lights red and SP-PHONE/HEADSET indicator ﬂashes.
	³If you misdial when making a call, press (SP-PHONE/HEADSET)twice and
	dial again.
3	To hang up, press (SP-PHONE/HEADSET).
	³The indicator light goes out.

To adjust the headset receiver volume (4 levels):

While using the headset, press VOLUME (_) or (^).

³Be sure that the (CONF) button is released.

³During a conversation using the headset, you cannot switch the call to the handset by lifting it off the cradle.

³If you disconnect the optional headset during a conversation with the handset on the cradle, the call will be switched to the speakerphone.

³During a conversation using the speakerphone, you can switch the call to the headset by connecting the headset.

Useful Information

31

Image 31

Panasonic KX-T2378JXW operating instructions Making/Answering Calls, Make sure to install the batteries

Contents

Model No. KX-T2378JXW Serial No Date of purchase Accessories includedBefore Initial Use For your future reference Contents Buttons p MIC Microphone p , 17 Mute Button p Hold Button p Indicator p , 17Volume Location of Controls Button p One-Touch Auto Dial Buttons p Tone Button p Display pPause Button p Redial Button p Flash Button p Display Press down in the direction Arrow and open the cover SettingsInstalling the Batteries Connecting the Handset Connect the telephone line cords to the unit as follows Connecting the Telephone Line CordTo connect a two-line telephone jack To connect two single-line telephone jacks If you use the unit only as a single-line telephone Connecting a Communication Device Press Mute Press Program to store the settingProgramming Summary of Preparations Make sure that a call is not put on hold To select Pulse, press2 To select Tone, press1 Selecting the Dialing Mode You can select AM/PM or 24-hour clock by programming Time Adjustment Press 1 to Setting the LCD ContrastSelecting the Ringer Volume Press Wall Template Wall MountingLocks, so the tab holds the handset Using the speakerphone Using the handsetMaking Calls Automatic Redial To redial the last number dialedTo put a call on hold To release the hold Answering Calls What the line indicator means Ex If you are using LINE1 Using the Other Line During a Conversation Conference Call Ex If you are using LineDuring a conference call Press a memory station number 0 to Speed DialerStoring Phone Numbers in Memory Enter a phone number, up to 22 digits To erase a stored number Dialing a Stored Number To store in an Upper memory location One-Touch DialerPress one of the one-touch auto dial buttons If the phone number is in an Upper To store in a Lower memory locationMemory location, press the one-touch From a Lower memory location From an Upper memory locationMemory card Temporary Tone Dialing Special FeaturesFor Call Waiting Service Users How to Use the Pause Button Press Mute while talking Muting Your ConversationFlash Button Selecting the ﬂash time Ex is entered Setting the PIN CodeEnter a new PIN code using a 4-digit Enter the current PIN code Enter the PIN code p To cancel the dial lockDial Lock To set the dial lock To set the call restriction Call RestrictionEnter the PIN code p Ex. Your PIN code is To cancel the call restriction Using the Optional HeadsetConnecting the Optional Headset to the Unit To adjust the headset receiver volume 4 levels Make sure to install the batteriesMaking/Answering Calls Battery Precautions Battery Replacement Before Requesting Help Problem Remedy Before Requesting Help ProblemRemedy Installations Environment Safety Instructions PQQX13204YA F1001-1111D 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan