To store in a Lower memory location | Panasonic KX-T2378JXW specs

PQQX13204YA-03 01.11.28 8:35 AM y [ W 23

Ò

To store in a LOWER memory location

1 Press (PROGRAM).

2	Enter a phone number, up to 22 digits.
2	³If you enter a wrong number, press
	(PROGRAM) and start again from step 1.

3 Press (AUTO/LOWER).

4 Press one of the one-touch auto dial buttons.

³A long beep sounds.

³The unit will return to the standby mode.

³If 3 beeps sound, the number entered in step 2 may be over 22 digits. Lift the handset and place it on the cradle to return to the standby mode, and start again from step 1.

³If a pause is required for dialing, press (PAUSE) where needed. Pressing (PAUSE) counts as one digit (p. 25).

To erase a stored number

1 Press (PROGRAM).

2	If the phone number is in an UPPER
	memory location, press the one-touch

auto dial button for the phone number to be erased.

OR

If the phone number is in a LOWER memory location, press (AUTO/LOWER), then press the one-touch auto dial button for the phone number to be erased.

³A long beep sounds.

³The unit will return to the standby mode.

Advanced Operation

23

Image 23

Panasonic KX-T2378JXW operating instructions To store in a Lower memory location, If the phone number is in an Upper

Contents

Model No. KX-T2378JXW Serial No Date of purchase Accessories includedBefore Initial Use For your future reference Contents Buttons p MIC Microphone p , 17 Mute Button p Hold Button p Indicator p , 17Volume Location of Controls Pause Button p Redial Button p Flash Button p One-Touch Auto Dial Buttons p Tone Button p Display pButton p Display Press down in the direction Arrow and open the cover SettingsInstalling the Batteries Connecting the Handset Connect the telephone line cords to the unit as follows Connecting the Telephone Line CordTo connect a two-line telephone jack To connect two single-line telephone jacks If you use the unit only as a single-line telephone Connecting a Communication Device Press Mute Press Program to store the settingProgramming Summary of Preparations Make sure that a call is not put on hold To select Pulse, press2 To select Tone, press1 Selecting the Dialing Mode You can select AM/PM or 24-hour clock by programming Time Adjustment Press 1 to Setting the LCD ContrastSelecting the Ringer Volume Press Locks, so the tab holds the handset Wall MountingWall Template Making Calls Using the handsetUsing the speakerphone Automatic Redial To redial the last number dialedTo put a call on hold To release the hold Answering Calls What the line indicator means Ex If you are using LINE1 Using the Other Line During a Conversation During a conference call Ex If you are using LineConference Call Press a memory station number 0 to Speed DialerStoring Phone Numbers in Memory Enter a phone number, up to 22 digits To erase a stored number Dialing a Stored Number Press one of the one-touch auto dial buttons One-Touch DialerTo store in an Upper memory location Memory location, press the one-touch To store in a Lower memory locationIf the phone number is in an Upper Memory card From an Upper memory locationFrom a Lower memory location Temporary Tone Dialing Special FeaturesFor Call Waiting Service Users How to Use the Pause Button Press Mute while talking Muting Your ConversationFlash Button Selecting the ﬂash time Ex is entered Setting the PIN CodeEnter a new PIN code using a 4-digit Enter the current PIN code Enter the PIN code p To cancel the dial lockDial Lock To set the dial lock Enter the PIN code p Ex. Your PIN code is Call RestrictionTo set the call restriction Connecting the Optional Headset to the Unit Using the Optional HeadsetTo cancel the call restriction Making/Answering Calls Make sure to install the batteriesTo adjust the headset receiver volume 4 levels Battery Precautions Battery Replacement Before Requesting Help Problem Remedy Before Requesting Help ProblemRemedy Installations Environment Safety Instructions PQQX13204YA F1001-1111D 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan