Setting the PIN Code, Ex is entered, Number

PQQX13204YA-03 01.11.28 8:35 AM y [ W 27

Setting the PIN Code

A 4-digit PIN Code (Personal Identiﬁcation Number) prevents unauthorized persons from using your unit. The PIN Code is required for the dial lock and call restriction to be set or canceled. The factory preset PIN code is “1111”.

Make sure that a call is not put on hold.

1	Press (PROGRAM).
2	Press (MUTE).
3	Press (5).
4	Enter the current PIN code.
4	(Ex. “1111” is entered.)
5	Press (PROGRAM).
5	³If a correct PIN code is entered, a beep
	will sound.
	³If a wrong PIN code is entered, 3 beeps
	will sound. Enter the correct PIN code
	and press (PROGRAM).
	³To return to the standby mode, lift the
	handset and hang up.
6	Enter a new PIN code using a 4-digit
6	number.
	(Ex. “1234” is entered.)
7	Press (PROGRAM).
7	³A long beep sounds.

³The unit will return to the standby mode.

Please write down your PIN code. If you forget your PIN code, consult your nearest Panasonic service center.

Advanced Operation

Page 27

Image 27

Panasonic KX-T2378JXW operating instructions Setting the PIN Code, Enter the current PIN code, Ex is entered, Number

Contents

Model No. KX-T2378JXW Serial No Date of purchase Accessories includedBefore Initial Use For your future reference Contents Buttons p MIC Microphone p , 17 Mute Button p Hold Button p Indicator p , 17Volume Location of Controls One-Touch Auto Dial Buttons p Tone Button p Display p Button pPause Button p Redial Button p Flash Button p Display Press down in the direction Arrow and open the cover SettingsInstalling the Batteries Connecting the Handset Connect the telephone line cords to the unit as follows Connecting the Telephone Line CordTo connect a two-line telephone jack To connect two single-line telephone jacks If you use the unit only as a single-line telephone Connecting a Communication Device Press Mute Press Program to store the settingProgramming Summary of Preparations Make sure that a call is not put on hold To select Pulse, press2 To select Tone, press1 Selecting the Dialing Mode You can select AM/PM or 24-hour clock by programming Time Adjustment Press 1 to Setting the LCD ContrastSelecting the Ringer Volume Press Wall Mounting Wall TemplateLocks, so the tab holds the handset Using the handset Using the speakerphoneMaking Calls Automatic Redial To redial the last number dialedTo put a call on hold To release the hold Answering Calls What the line indicator means Ex If you are using LINE1 Using the Other Line During a Conversation Ex If you are using Line Conference CallDuring a conference call Press a memory station number 0 to Speed DialerStoring Phone Numbers in Memory Enter a phone number, up to 22 digits To erase a stored number Dialing a Stored Number One-Touch Dialer To store in an Upper memory locationPress one of the one-touch auto dial buttons To store in a Lower memory location If the phone number is in an UpperMemory location, press the one-touch From an Upper memory location From a Lower memory locationMemory card Temporary Tone Dialing Special FeaturesFor Call Waiting Service Users How to Use the Pause Button Press Mute while talking Muting Your ConversationFlash Button Selecting the ﬂash time Ex is entered Setting the PIN CodeEnter a new PIN code using a 4-digit Enter the current PIN code Enter the PIN code p To cancel the dial lockDial Lock To set the dial lock Call Restriction To set the call restrictionEnter the PIN code p Ex. Your PIN code is Using the Optional Headset To cancel the call restrictionConnecting the Optional Headset to the Unit Make sure to install the batteries To adjust the headset receiver volume 4 levelsMaking/Answering Calls Battery Precautions Battery Replacement Before Requesting Help Problem Remedy Before Requesting Help ProblemRemedy Installations Environment Safety Instructions PQQX13204YA F1001-1111D 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan

Panasonic KX-T2378JXW Setting the PIN Code, Enter the current PIN code, Ex is entered, Number

Models: KX-T2378JXW

Setting the PIN Code

Make sure that a call is not put on hold.

Press (MUTE).

Press (5).

Enter the current PIN code.

(Ex. “1111” is entered.)

Enter a new PIN code using a 4-digit

number.