Manuals / Panasonic / Communications / Answering Machine

Panasonic KX-T2378JXW Setting the LCD Contrast, Selecting the Ringer Volume, Press 1 to

Models: KX-T2378JXW

1 36

Download 36 pages 8.71 Kb

Page 13

Image 13

PQQX13204YA-02 01.11.28 8:34 AM y [ W 13

Setting the LCD Contrast

You can select the LCD contrast level from 1 to 4 by programming. Your phone comes from the factory set to 3.

Make sure that a call is not put on hold.

1 Press (PROGRAM).

2	Press (MUTE).
3	Press (7).
3	³The current setting is displayed.
4	Press (1) to (4).
4	³Each time you press a button, the level
	will change on the display.
5	Press (PROGRAM).
5	³A long beep sounds.

³The unit will return to the standby mode.

Preparation

Selecting the Ringer Volume

You can select the ringer volume of each line to HIGH, LOW or OFF. Your phone comes from the factory set to HIGH.

RINGER Selectors:

Set to HIGH, LOW or OFF.

³When set to OFF, the selected line(s) will not ring.

LINE1

RINGER

LINE2

OFF HIGH OFF HIGH

LOWLOW

Page 13

Image 13

Panasonic KX-T2378JXW operating instructions Setting the LCD Contrast, Selecting the Ringer Volume, Press 1 to

Contents

Model No. KX-T2378JXW Before Initial Use Accessories includedFor your future reference Serial No Date of purchase Contents Volume Indicator p , 17Location of Controls Buttons p MIC Microphone p , 17 Mute Button p Hold Button p Button p One-Touch Auto Dial Buttons p Tone Button p Display pPause Button p Redial Button p Flash Button p Display Installing the Batteries SettingsConnecting the Handset Press down in the direction Arrow and open the cover To connect a two-line telephone jack Connecting the Telephone Line CordTo connect two single-line telephone jacks Connect the telephone line cords to the unit as follows If you use the unit only as a single-line telephone Connecting a Communication Device Programming Summary of Preparations Press Program to store the settingMake sure that a call is not put on hold Press Mute To select Pulse, press2 To select Tone, press1 Selecting the Dialing Mode You can select AM/PM or 24-hour clock by programming Time Adjustment Selecting the Ringer Volume Setting the LCD ContrastPress Press 1 to Wall Template Wall MountingLocks, so the tab holds the handset Using the speakerphone Using the handsetMaking Calls To put a call on hold To redial the last number dialedTo release the hold Automatic Redial Answering Calls What the line indicator means Ex If you are using LINE1 Using the Other Line During a Conversation Conference Call Ex If you are using LineDuring a conference call Storing Phone Numbers in Memory Speed DialerEnter a phone number, up to 22 digits Press a memory station number 0 to To erase a stored number Dialing a Stored Number To store in an Upper memory location One-Touch DialerPress one of the one-touch auto dial buttons If the phone number is in an Upper To store in a Lower memory locationMemory location, press the one-touch From a Lower memory location From an Upper memory locationMemory card For Call Waiting Service Users Special FeaturesHow to Use the Pause Button Temporary Tone Dialing Flash Button Muting Your ConversationSelecting the ﬂash time Press Mute while talking Enter a new PIN code using a 4-digit Setting the PIN CodeEnter the current PIN code Ex is entered Dial Lock To cancel the dial lockTo set the dial lock Enter the PIN code p To set the call restriction Call RestrictionEnter the PIN code p Ex. Your PIN code is To cancel the call restriction Using the Optional HeadsetConnecting the Optional Headset to the Unit To adjust the headset receiver volume 4 levels Make sure to install the batteriesMaking/Answering Calls Battery Precautions Battery Replacement Before Requesting Help Problem Remedy Before Requesting Help ProblemRemedy Installations Environment Safety Instructions PQQX13204YA F1001-1111D 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan

Setting the LCD Contrast

Make sure that a call is not put on hold.

Press (MUTE).

Press (7).

Press (1) to (4).

Selecting the Ringer Volume

RINGER Selectors: