One-Touch Dialer | Panasonic KX-T2378JXW specification

PQQX13204YA-03 01.11.28 8:35 AM y [ W 22

One-Touch Dialer

Storing Phone Numbers in Memory

You can store up to 20 phone numbers in the one-touch auto dial buttons (10 numbers in UPPER memory locations, 10 numbers in LOWER memory locations).

Do not press any one-touch auto dial buttons before storing to prevent misoperation.

Make sure that a call is not put on hold.

(AUTO/LOWER)

One-touch auto dial buttons

(EMERGENCY)

(PROGRAM)

(PAUSE) (SP-PHONE/HEADSET)

and Indicator

To store in an UPPER memory location

It is recommended that you program an emergency number in the EMERGENCY button.

1

2

3

Press (PROGRAM).

Enter a phone number, up to 22 digits.

³If you enter a wrong number, press (PROGRAM) and start again from step 1.

Press one of the one-touch auto dial buttons.

³A long beep sounds.

³The unit will return to the standby mode.

³If 3 beeps sound, the number entered in step 2 may be over 22 digits. Press (PROGRAM) to return to the standby mode, and start again from step 1.

³If a pause is required for dialing, press (PAUSE) where needed. Pressing (PAUSE) counts as one digit (p. 25).

22

Image 22

Panasonic KX-T2378JXW One-Touch Dialer, To store in an Upper memory location, Press one of the one-touch auto dial buttons

Contents

Model No. KX-T2378JXW For your future reference Accessories includedBefore Initial Use Serial No Date of purchase Contents Location of Controls Indicator p , 17Volume Buttons p MIC Microphone p , 17 Mute Button p Hold Button p Button p One-Touch Auto Dial Buttons p Tone Button p Display pPause Button p Redial Button p Flash Button p Display Connecting the Handset SettingsInstalling the Batteries Press down in the direction Arrow and open the cover To connect two single-line telephone jacks Connecting the Telephone Line CordTo connect a two-line telephone jack Connect the telephone line cords to the unit as follows Connecting a Communication Device If you use the unit only as a single-line telephone Make sure that a call is not put on hold Press Program to store the settingProgramming Summary of Preparations Press Mute Selecting the Dialing Mode To select Pulse, press2 To select Tone, press1 Time Adjustment You can select AM/PM or 24-hour clock by programming Press Setting the LCD ContrastSelecting the Ringer Volume Press 1 to Wall Template Wall MountingLocks, so the tab holds the handset Using the speakerphone Using the handsetMaking Calls To release the hold To redial the last number dialedTo put a call on hold Automatic Redial What the line indicator means Answering Calls Using the Other Line During a Conversation Ex If you are using LINE1 Conference Call Ex If you are using LineDuring a conference call Enter a phone number, up to 22 digits Speed DialerStoring Phone Numbers in Memory Press a memory station number 0 to Dialing a Stored Number To erase a stored number To store in an Upper memory location One-Touch DialerPress one of the one-touch auto dial buttons If the phone number is in an Upper To store in a Lower memory locationMemory location, press the one-touch From a Lower memory location From an Upper memory locationMemory card How to Use the Pause Button Special FeaturesFor Call Waiting Service Users Temporary Tone Dialing Selecting the ﬂash time Muting Your ConversationFlash Button Press Mute while talking Enter the current PIN code Setting the PIN CodeEnter a new PIN code using a 4-digit Ex is entered To set the dial lock To cancel the dial lockDial Lock Enter the PIN code p To set the call restriction Call RestrictionEnter the PIN code p Ex. Your PIN code is To cancel the call restriction Using the Optional HeadsetConnecting the Optional Headset to the Unit To adjust the headset receiver volume 4 levels Make sure to install the batteriesMaking/Answering Calls Battery Replacement Battery Precautions Problem Remedy Before Requesting Help ProblemRemedy Before Requesting Help Safety Instructions Installations Environment 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan PQQX13204YA F1001-1111D