Before Requesting Help, Problem Remedy | Panasonic KX-T2378JXW

PQQX13204YA-04 01.11.28 8:36 AM y [ W 33

Before Requesting Help

Ò

Problem	Remedy
The unit does not work.	³Check the settings (p. 7–14).
	³Remove the batteries and reinstall
	them to reset the unit.
The unit does not ring.	³The RINGER selector(s) is/are set to
	OFF. Set to HIGH or LOW (p. 13).
The line indicators do not	³Check the settings (p. 7–14).
work properly.	³The batteries have become weak.
	Replace them with new ones (p. 32).
You cannot dial.	³Check that the dialing mode selection
	is correct (p. 11).
	³Dial lock mode is set. To cancel the
	mode, see page 28.
	³The dialed number is restricted. To
	cancel, see page 30.
The other party suddenly	³(MUTE) may have been pressed during
cannot hear your voice	the conversation. If “	” is displayed,
during a conversation.	press (MUTE).
You cannot program items	³Programming is not possible when a
such as the dialing mode.	call is put on hold.
	³Do not pause for over 60 seconds
	while programming.
You cannot store a phone	³Conﬁrm the line button is pressed.
number in memory.	³Programming is not possible when a
	call is put on hold.
	³Check that the batteries are installed in
	the unit and that the battery power is
	not low.
	³Do not enter a phone number more
	than 22 digits long.
While programming, the	³To answer the call, lift the handset or
unit starts to ring and stops	press (SP-PHONE/HEADSET). Start
the program.	again from the beginning after hanging
	up.
You cannot redial by	³If the last number dialed was more
pressing (REDIAL).	than 32 digits long, the number will not
	be redialed correctly.

Useful Information

33

Image 33

Panasonic KX-T2378JXW operating instructions Before Requesting Help, Problem Remedy

Contents

Model No. KX-T2378JXW Before Initial Use Accessories includedFor your future reference Serial No Date of purchase Contents Volume Indicator p , 17Location of Controls Buttons p MIC Microphone p , 17 Mute Button p Hold Button p One-Touch Auto Dial Buttons p Tone Button p Display p Button pPause Button p Redial Button p Flash Button p Display Installing the Batteries SettingsConnecting the Handset Press down in the direction Arrow and open the cover To connect a two-line telephone jack Connecting the Telephone Line CordTo connect two single-line telephone jacks Connect the telephone line cords to the unit as follows If you use the unit only as a single-line telephone Connecting a Communication Device Programming Summary of Preparations Press Program to store the settingMake sure that a call is not put on hold Press Mute To select Pulse, press2 To select Tone, press1 Selecting the Dialing Mode You can select AM/PM or 24-hour clock by programming Time Adjustment Selecting the Ringer Volume Setting the LCD ContrastPress Press 1 to Wall Mounting Wall TemplateLocks, so the tab holds the handset Using the handset Using the speakerphoneMaking Calls To put a call on hold To redial the last number dialedTo release the hold Automatic Redial Answering Calls What the line indicator means Ex If you are using LINE1 Using the Other Line During a Conversation Ex If you are using Line Conference CallDuring a conference call Storing Phone Numbers in Memory Speed DialerEnter a phone number, up to 22 digits Press a memory station number 0 to To erase a stored number Dialing a Stored Number One-Touch Dialer To store in an Upper memory locationPress one of the one-touch auto dial buttons To store in a Lower memory location If the phone number is in an UpperMemory location, press the one-touch From an Upper memory location From a Lower memory locationMemory card For Call Waiting Service Users Special FeaturesHow to Use the Pause Button Temporary Tone Dialing Flash Button Muting Your ConversationSelecting the ﬂash time Press Mute while talking Enter a new PIN code using a 4-digit Setting the PIN CodeEnter the current PIN code Ex is entered Dial Lock To cancel the dial lockTo set the dial lock Enter the PIN code p Call Restriction To set the call restrictionEnter the PIN code p Ex. Your PIN code is Using the Optional Headset To cancel the call restrictionConnecting the Optional Headset to the Unit Make sure to install the batteries To adjust the headset receiver volume 4 levelsMaking/Answering Calls Battery Precautions Battery Replacement Before Requesting Help Problem Remedy Before Requesting Help ProblemRemedy Installations Environment Safety Instructions PQQX13204YA F1001-1111D 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan