Panasonic KX-T2378JXW operating instructions Call Restriction, To set the call restriction

PQQX13204YA-03 01.11.28 8:36 AM y [ W 29

Ò

Call Restriction

You can prevent the unit from dialing phone numbers beginning with specified digit(s) (1 digit or 2 digits). Phone numbers with the restricted leading digits cannot be dialed out.

To set the call restriction

Make sure that a call is not put on hold.

1

2

3

Press (PROGRAM).

Press (MUTE).

Press (1).

³If you use “1111” as aPIN code (factory set), the display on the right will be shown. There is no need to enter a PIN code. Go to step 6.

³After the PIN code is changed, “– – – –” will be displayed.

4	Enter the PIN code (p. 27).
	(Ex. Your PIN code is “1234”.)
5	Press (PROGRAM).
	³If a wrong PIN code is entered, 3 beeps
	will sound. Enter a correct PIN code and
	press (PROGRAM).
	³The current setting is displayed. (Ex. “67”
	is entered as the restricted digits.)
6	Enter the number(s) (1 digit or 2 digits)
	you want to restrict ((0) to (9)). (Ex. “12”
	is entered as the restricted digits.)
	³If you enter a wrong number, enter a correct number.
	³To change restricted digits from 2 digits to 1 digit, press ($) for 2 digits to
7	change to “– –” and enter 1 digit.
	Press (PROGRAM).
	³A long beep sounds.

³The unit will return to the standby mode.

³If your unit is connected to a PBX, this function may not operate. Contact your PBX supplier for more information.

When dialing a phone number with the restricted leading digit(s), the dialed number will flash on the display, but not dialed out.

Advanced Operation

29