Electrolux Z3300 manual Using the power nozzle, Using the turbo nozzle, Use the nozzles as follows

				English
				GETTING THE BEST RESULTS
				Use the nozzles as follows:
				Carpets: Use the carpet/hard floor nozzle with the lever in
				position (1). Reduce suction power for small carpets.
				Hard floors: Use the carpet/hard floor nozzle with the
1	2	3	4	lever in position (2). If you have a carpet/hard floor nozzle
				with two pedals – press the pedal on the right (3) to
				vacuum up animal hair, etc. more effectively.
				Wooden floors: Use the parquet nozzle (certain models
				only, 4).
				Upholstered furniture: Use the combination nozzle as
				shown in (5).
				Curtains, lightweight fabrics, etc.: Use the combination
				nozzle as shown in (5). Reduce suction power if necessary.
				Frames, bookshelves, etc.: Use the combination nozzle as
				shown in (6) or Easy clean (7 – certain models only).
				Crevices, corners, etc.: Use the crevice nozzle (8).
				Using the power nozzle
				(Requires an Ultra Silencer equipped with a power socket. The
5	6	7	8	power nozzle is delivered only with certain models, or could
				be bought as an accessory.)
				9 Attach the nozzle to the tube.
				10 Connect the power nozzle to the socket on the
				vacuum cleaner.
				11 Use the clips to secure the cable along the tubes and
				hose.
				12 The power nozzle starts operating when the vacuum
				cleaner is switched on.
				Using the turbo nozzle
				(certain models only)
				13 Attach the nozzle to the tube.
				Note: Do not use the power or turbo nozzle on skin rugs, rugs
				with long fringes or a pile depth exceeding 15 mm. To avoid
				damaging the carpet, do not keep the nozzle stationary
				whilst the brush is rotating. Do not pass the nozzle across
9	10	11	12	electric cables, and be sure to switch off the vacuum cleaner
				immediately after use.

13

8

2193277-01.indd 8

7/18/07 4:32:46 PM