01

Installing the receiver

!When installing this unit, make sure to put it on a level and stable surface.

!Don’t install it on the following places:

—on a color TV (the screen may distort)

—near a cassette deck (or close to a device that gives off a magnetic field). This may interfere with the sound.

—in direct sunlight

—in damp or wet areas

—in extremely hot or cold areas

—in places where there is vibration or other movement

—in places that are very dusty

—in places that have hot fumes or oils (such as a kitchen)

!Do not touch this receiver’s bottom panel while the power is on or just after it is turned off. The bottom panel becomes hot when the power is on (or right after it is turned off) and could cause burns.

Loading the batteries

The batteries included with the unit are to check initial operations; they may not last over a long period. We recommend using alkaline batteries that have a longer life.

Before you start

Operating range of remote control unit

The remote control may not work properly if:

!There are obstacles between the remote control and the receiver’s remote sensor.

!Direct sunlight or fluorescent light is shining onto the remote sensor.

!The receiver is located near a device that is emitting infrared rays.

!The receiver is operated simultaneously with another infrared remote control unit.

30° 30°

7 m (23 ft.)

WARNING

!Do not use or store batteries in direct sunlight or other excessively hot place, such as inside a car or near a heater. This can cause batteries to leak, overheat, explode or catch fire. It can also reduce the life or perfor- mance of batteries.

CAUTION

Incorrect use of batteries may result in such hazards as leakage and bursting. Observe the following precautions:

!Never use new and old batteries together.

!Insert the plus and minus sides of the batteries properly according to the marks in the battery case.

!Batteries with the same shape may have different voltages. Do not use different batteries together.

!When disposing of used batteries, please comply with governmental regulations or environmental public insti- tution’s rules that apply in your country/area.

About using AVNavigator (included CD-ROM)

The included AVNavigator CD-ROM contains Wiring Navi allowing you to easily make the receiver’s connections and initial settings in dialog fashion. High precision initial settings can be completed easily simply by following the instructions on the screen to make the connections and settings.

There are also other features enabling easy use of various functions, including an Interactive Manual that operates in association with the receiver, updating of various types of software, and MCACC Application that lets you check the MCACC measurement results on 3D graphs.

Installing AVNavigator

1Load the included CD-ROM into your computer’s CD drive.

The CD-ROM’s top menu screen appears.

2Click ‘Install AVNavigator’ from the CD-ROM top menu.

3Follow the instructions on the screen to install.

When “Finish” is selected, installation is completed.

4 Remove the included CD-ROM from the computer’s CD drive.

Handling the CD-ROM

Operating Environment

!AVNavigator can be used with Microsoft® Windows® XP/Vista/7.

!A browser is at times used for AVNavigator functions. The supported browser is Microsoft Internet Explorer 8 or 9.

!Adobe® Flash® Player 10 must be installed to use some of the functions in AVNavigator. For details, see http://www.adobe.com/downloads/.

9