Elite Video SC-63 manual 97

13

USB interface

Symptoms	Causes	Remedies
The folders/files stored on a	The folders/files are currently stored	Store the folders/files in the FAT region.
USB memory device are not	in a region other than the FAT (File
displayed.	Allocation Table) region.
	The number of levels in a folder is	Limit the maximum number of levels in a folder to 9 (page
	more than 9.	44).
	The audio files are copyrighted.	Copyrighted audio files stored on a USB memory device
		cannot be played back (page 44).
A USB memory device is	The USB memory device does not	Try using a USB memory device compatible with the mass
not recognized.	support the mass storage class	storage class specifications. Note that there are cases
	specifications.	where even the audio files stored on a USB memory device
		compatible with the mass storage class specifications are
		not played back on this receiver (page 44).
		Connect the USB memory device and switch on this
		receiver (page 33).
	A USB hub is currently being used.	This receiver does not support USB hubs (page 44).
	This receiver recognizes the USB	Switch off and on again this receiver.
	memory device as a fraud.	Reconnect the USB device with the receiver switched off.
		Change to an input other than iPod/USB, then set the input
		back to iPod/USB.
A USB memory device is	Some formats of USB memory	Check whether the format of your USB memory device is
connected and displayed,	devices, including FAT 12, NTFS, and	either FAT 16 or FAT 32. Note that the FAT 12, NTFS, and
but the audio files stored	HFS, cannot be played back on this	HFS formats cannot be played back on this receiver (page
on the USB memory device	receiver.	44).
cannot be played back.	The file format cannot be properly	See the list of file formats that can be played back on this
	played back on this receiver.	receiver (page 45).

iPod

Symptoms	Causes	Remedies
iPod is not recognized.	This receiver recognizes the iPod as	Switch off and on again this receiver.
	a fraud.
		Reconnect the iPod with the receiver switched off.
		Change to an input other than iPod/USB, then set the input
		back to iPod/USB.

FAQ

Network

Symptoms	Causes	Remedies
Cannot access the network.	The LAN cable is not firmly con-	Firmly connect the LAN cable (page 32).
	nected.
	The router is not switched on.	Switch on the router.
	Internet security software is cur-	There are cases where a component with Internet security
	rently installed in the connected	software installed cannot be accessed.
	component.
	The audio component on the net-	Switch on the audio component on the network before
	work which has been switched off is	switching on this receiver.
	switched on.
Playback does not start	The component is currently discon-	Check whether the component is properly connected to
while “Connecting...” con-	nected from this receiver or the	this receiver or the power supply.
tinues to be displayed.	power supply.
The PC or Internet radio is	The corresponding IP address is not	Switch on the built-in DHCP server function of your router,
not properly operated.	properly set.	or set up the network manually according to your network
		environment (page 87).
	The IP address is being automati-	The automatic configuration process takes time. Please
	cally configured.	wait.
The audio files stored on	Windows Media Player 11 or	Install Windows Media Player 11 or Windows Media Player
components on the net-	Windows Media Player 12 is not cur-	12 on your PC (page 53).
work, such as a PC, cannot	rently installed on your PC.
be played back.
	Audio files recorded in MPEG-4	Audio files recorded in MPEG-4 AAC or FLAC cannot be
	AAC or FLAC are being played back	played back on Windows Media Player 11 or Windows
	on Windows Media Player 11 or	Media Player 12. Try using another server. Refer to the
	Windows Media Player 12.	operation manual supplied with your server.
	The component connected to the	Check whether the component is affected by special cir-
	network is not properly operated.	cumstances or is in the sleep mode.
		Try rebooting the component if necessary.
	The component connected to the	Try changing the settings for the component connected to
	network does not permit file sharing.	the network.
	The folder stored on the component	Check the folder stored on the component connected to
	connected to the network has been	the network.
	deleted or damaged.
	Network connections could be	Check the computer’s network settings, security settings,
	restricted due to the computer’s net-	etc.
	work settings, security settings, etc.
Cannot access the com-	The component connected to the	If the client is automatically authorized, you need to enter
ponent connected to the	network is not properly set.	the corresponding information again. Check whether the
network.		connection status is set to “Do not authorize”.
	There are no playable audio files on	Check the audio files stored on the component connected
	the component connected to the	to the network.
	network.

97