Raven Installation Guide

MAN-RAVIG (Ver. 1.1)

Chapter 3: Installation

3.1Site Requirements

You can guarantee the safe operation of the Raven by ensuring that it is installed in an appropriate environment.

Feature

Value

Ambient operating temperature

-40 °C ~ 70 °C (- 40 °C ~ 160 °F)

Maximum case temperature

87 °C (188 °F)

Note: Models for extended environmental conditions are available.

3.2Unpacking the Amplifier Components

To unpack the Raven:

Carefully remove the servo amplifier from the box and the Styrofoam.

1.Check the amplifier to ensure that there is no visible damage to the instrument. If any damage has occurred, report immediately to the carrier that delivered your amplifier.

2.To ensure that the Raven you have unpacked is the appropriate type for your requirements, find the part number sticker on the side of the Raven:

The P/N number at the top gives the type designation as follows:

RAV- XX/YYY

Current

Maximum

Operating

Voltage

3-1

3.Verify that the Raven type is the one that you ordered, and ensure that the voltage meets your specific requirements.

Page 11
Image 11
Elmo EXTRA IQ RAVEN, RAV-25/60 manual Installation, Site Requirements, Unpacking the Amplifier Components, Feature Value