Raven Installation Guide
Chapter 1: Safety Information
In order to achieve the optimum, safe operation of the Raven servo amplifier, it is imperative that you implement the safety procedures included in this user guide. This information is provided to protect you and to keep your work area safe when operating the Raven and accompanying equipment. Read this chapter carefully before you begin the installation process.
Ensure that all system components are connected to earth ground. Electrical safety is provided through a
Only qualified personnel may install, adjust, maintain and repair the servo amplifier. A “qualified person” has the knowledge and authorization to perform tasks such as transporting, assembling, installing, commissioning and operating motors.
The Raven servo amplifier contains
To avoid any potential hazards that may cause severe personal injury or damage to the product during operation, keep all covers and cabinet doors shut.
The following safety symbols are used in this manual:
Warning:
This information is needed to avoid a safety hazard, which might cause bodily injury.
Caution:
This information is necessary for preventing damage to the product or to other equipment.
Note:
This is auxiliary information that ensures the correct operation of the equipment.
1.1Warnings
Cleaning after soldering
To avoid the damage of the product's acrylic coating the Raven must not be cleaned after soldering by dissolving solvents and /or "water" cleaning process. For more details:
