Elo TouchSystems AMM18TK manual Power Management Function, Stand-by Mode, Suspend Mode, Off Mode

AMM170TK/AMM17TK/AMM18TK/AMM19TK/AMM19TK(HB) 13

POWER MANAGEMENT FUNCTION

The monitor is equipped with the power management function which automatically reduce the power consumption when not in use in three power level modes.

•Stand-by Mode

The monitor goes into stand-by mode when the horizontal sync signal is off for about 10 seconds. In this mode, the screen goes off and the power LED blinks for 3 seconds On and 1 second Off. The screen is displayed after the horizontal sync signal is restored.

•Suspend Mode

The monitor goes into suspend mode when the vertical sync signal is off for about 10 seconds. The power consumption during this is less than 8 W. In this mode, the screen goes off and the power LED blinks for 3 seconds On and 1 second Off. The screen is displayed after the vertical sync signal is restored.

•Off Mode

The monitor goes into power-off mode when the vertical and horizontal sync signals are off for about 10 seconds. In this mode, the screen goes off and the power LED blinks for 3 seconds On and 1 second Off. The screen is displayed after the vertical and horizontal sync signals are restored.

Power Management System

The AMM17TK, AMM18TK, AMM19TK and AMM19TK/HB Medical Monitor complies with the VESA DPMS power management proposal. The VESA DPMS proposal provides four phases of power-saving modes by detecting the horizontal sync signal as shown in the table blow.

M o de	D C Input Po we r			A C Input po we r			LE D Sta tus
	(m o nito r o nly )			(Incl. A C a da pte r)
O n	3 5 W max.			6 0 W		max.	S tead y G ree n
S tand b y	4 .5	W	max.	6	W	max.	B link ing G reen
S up e nd	4 .5	W	max.	6	W	max.	B link ing G reen
O n	4 .5	W	max.	6	W	max.	B link ing G reen

When the monitor is power saving mode or detects an incorrect timing, the screen will be blank and power LED indicator will blink.