14User’s Guide
DDC
To make your installation easier, the monitor is able to Plug and Play with your system if your system also supports DDC protocol. The DDC (Display Data Channel) is a communication protocol through which the monitor automatically informs the host system about its capabilities, for example, supported resolutions and corresponding timing. The monitor supports DDC1 and DDC2B standard.
INSTALLATION
To install the monitor to your host system, please follow the steps as given below:
Steps
1.Use the VGA cable that provides
2.Connect the DC power to the DC power connector on the monitor.
3.If use with USB hub, connect the loop cable between the monitor and the USB hub then connect the DC power to the bottom of USB hub.
4.Connect one end of AC power cord into the AC Adapter and the other end to AC
power outlet. (See page 13)
5.Then turn the computer on and then the monitor.
6.If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.
