Main Menu

Temperature Display Adjust – Default is .Your thermostat was accurately calibrated at the factory. However, this option allows you to change the humidity or temperature displayed to match other thermostats in your home.

Dehumidification Setpoint – Default is 95%. Setpoint is the percent humidity that the cooling system will attempt to maintain. Only available when dehumidification equipment is enabled (see Communicating Devices in Advanced Installer Menu).

Humidity Setpoint – Default is 20%. Humidity setpoint is the percent humidity that the heating system and humidifier will attempt to maintain in Heating.

Only available when humidification equipment is enabled (see Communi- cating Devices in Advanced Installer Menu).

MAIN MENU

27

Page 27
Image 27
Emerson 1HDEZ-1521 installation instructions Main Menu