Emerson CF3100AGW00 owner manual Your ceiling fan in now installed and wired and ready for use

SW105 RECEIVER

BLACK SUPPLY

WIRE

WHITE RECEIVER WIRE

BLACK RECEIVER WIRE WHITE SUPPLY WIRE

BLACK/WHITE

RECEIVER WIRE BLUE RECEIVER WIRE

BLUE FAN WIRE

WHITE FAN WIRE

YELLOW RECEIVER WIRE

BLACK FAN WIRE

DOWNROD

Figure 15

WARNING

Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

4.After connections have been made, separate the white and green wires from the black, blue and yellow wires.

5.Carefully turn the wires upward and insert them up through the open side of the hanger bracket and into the outlet box. Push the green equipment/earth ground and white grounded neutral wires into one side of the outlet box; push the black, blue and yellow ungrounded wires into the other side of the outlet box.

OUTLET BOX

HANGER

BRACKET

1-1/4" THREADED	RECEIVER
STUDS (2)

CEILING

COVER

Figure 16

6.Screw the two 1-1/4” threaded studs (supplied) into the tapped holes in the hanger bracket (Figure 16).

7.Lift the ceiling cover up to the threaded studs and turn until studs protrude through the holes in the ceiling cover (Figure 17).

8.Secure the ceiling cover in place by installing two lockwashers and two knurled knobs (supplied) (Figure 26). Tighten the knurled knobs securely until the ceiling cover fits snugly against the ceiling and the hole in the ceiling cover is clear of the downrod.

9.Your ceiling fan in now installed and wired and ready for use.

	OUTLET
	BOX
	HANGER
	BRACKET
	1-1/4" THREADED
CEILING COVER	STUD (2)
	LOCKWASHER (2)
HANGER BALL/DOWNROD	KNURLED KNOB (2)
ASSEMBLY

Figure 17

WARNING

To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.

9 U.L. Model No.: CF3100