Emerson CKT9100 CLOCK RA DIO OP E RATING INSTRUCTIONS

IMPORTANT: The first time you connect your new SmartSet® clock radio to the

AC outlet the internal computer will automatically set the time correctly for the

Eastern Time Zone, which is the initial default setting. The display will scan for a

few seconds and then show the correct Day and Time in the Eastern zone. If you

live in the Eastern Time zone, there’s nothing else to do. Your clock is set correctly

and running.

If you do not live in the Eastern Time zone you must change the default zone

display to your own zone. You only do this one time and the SmartSet® will remember

the new default zone setting and will always return to that setting after a power

interruption

There are 7 time zones programmed into your SmartSet® clock radio as follows:

ZONE 1—Atlantic Time

ZONE 2—Eastern Time (Default Setting)

ZONE 3—Central Time

ZONE 4—Mountain Time

ZONE 5—Pacific Time

ZONE 6—Yukon Time

ZONE 7—Hawaiian Time

To change the default time zone display, depress the TIME ZONE button.

The number “2” will appear on the display

indicating that the default zone is ZONE 2, Eastern

Time.

Hold the TIME ZONE button and then press either the SET + or SET – buttons

until your own time zone appears on the display, then release th e buttons. The

clock display will change to the correct time in the time zone you selected. The

clock will always return to the correct time in the zone you selected after every

power interruption. If you move to a different time zone, simply change the default

zone display to the new zone and the SmartSet® will remember that setting for you.

CLOCK RA DIO OP E RATING INSTRUCTIONS

CKT9100_090606.p65 6/9/2006, 11:0025