10
ANTENNA CONNECTIONS
Insertthe Rod Antenna on top of the rear cabinet and connect other end to the antenna jack as
shownbelow.
CONNECTINGTHE ROD ANTENNA (NOT SUPPLIED).
RODANTENNAAND ADAPTOR ARE NOTSUPPLIED.
OUTDOOR ANTENNA CONNECTIONS
Followthe instructions for the type of antenna system you intend to use. If using cable or
Satellite,see page 8.
OUTDOOR VHF/UHF ANTENNA CONNECTION(ANTENNA NOT SUPPLIED)
CombinationVHF/UHF CombinationVHF/UHF
Antenna(Single75 ohm cable Antenna(separateVHF and SeparateVHF/UHF
Or300 ohm twin-lead wire) UHF300 ohm twin-leads) Antennas
Connectthe 75 ohm cable
fromthe VHF Connect
antennaand the UHF
antennatwin-lead wire to a
combiner(NOTSUPPLIED).
Attachthe combiner to the
antennajack.
Connectthe 75 Ohm cable
formcombination VHF/UHF
antennato the antenna jack.
OR
Ifyour combination antenna
hasa 300 ohm twin-lead
wire,use a 300-75 ohm
matchingtransformer
(NOTSUPPLIED)
Connectthe UHF twin-lead
wireto a combiner (NOT
SUPPLIED).Connect the
VHFtwin-lead to a 300-75
ohmmatching transformer
(NOTSUPPLIED). Attach
thetransformertothe
combiner.Attach the
combinerto the antenna
jack.
Combiner
UHF300Ohm
VHF300Ohm
VHF/UHF
75Ohm Combiner
UHF300Ohm
VHF75Ohm
NOTE:If your VHF antenna
hasa twin-lead wire use a
300-75ohm matching
transformer,then Connect
thetransformer to the
combiner.