CABLE (CATV)/SATELLITE CONNECTIONS

This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some cable TV companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.

FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE

For basic cable service not requiring a converter/ descrambler box, connect the CATV 75 ohm coaxial cable to the VHF/UHF jack on the rear of the TV.

FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE OR SATELLITE

If you subscribe to a satellite service or a cable TV service which requires the use of a converter/descrambler box, connect the incoming 75 ohm coaxial cable to the converter/ descrambler box. Using another 75 ohm cable, connect the output of the converter/descrambler or satellite box to the antenna jack on the TV. Follow the connections shown below. Set the TV/ VCR to the output channel of the converter/descrambler or satellite box (usually 3 or 4) and use the converter/descrambler or satellite box to select channels.

CONVERTER/DESCRAMBLER

OR SATELLITE BOX

 

75 OHM CABLE

INCOMING 75OHM

TO TV/VCR

 

CATV CABLE

 

FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH

SCRAMBLED PREMIUM CHANNELS

If you subscribe to a satellite service or a cable TV service in which basic channels are unscrambled and premium channels require the use of a converter/descrambler box, you may wish to use a signal splitter and an A/B switch box (available from the cable company or an electronic supply store). Follow the connections shown below. With the switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the “A” position, tune your TV to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to tune scrambled channels.

 

CONVERTER/DESCRAMBLER

SPLITTER

A/B SWITCH

INCOMING

75 OHM

75 OHM

CABLE

CATV CABLE

 

FAQ:

I connected my cable, but why can’t I get channels above 69?

Make sure the AIR/CABLE option is set to CABLE, see page 16. Also, make sure your cable company broadcasts channels in the range you are searching.

8

Page 9
Image 9
Emerson DTE316 manual Cable CATV/SATELLITE Connections, For Subscribers to Basic Cable TV Service, Faq