Installation & User Manual
Ed 19UK | June 2013 |
Flexible rubber tube mounting 80 ºC - drawing no. G022P001:
EE | CT5 | S/N: |
Tank top |
H |
Bulkhead |
Tank bottom
A top flange made of SS 316L connected to rubber tube by a tightening clip using a special tool. The opposite hose end covers the transducer body and is fixed by a tightening clip.
NB: When ordering this mounting type always specify length for the measurement of H cf. above drawing.
Flexible PTFE tube mounting 125ºC - drawing no. G022P021:
EE | CT5 | S/N: |
Tank top |
H |
Bulkhead |
Tank bottom |
A top flange made of SS 316L connected to a Stainless Steel braided PTFE tube by fittings fixed to the tube by using special tools. A fitting in the opposite tube end is fixed to the transducer by means of nut and ferrules. Min. hose bending radius 130 mm.
NB: This mounting type cannot be used in hazardous area.
When ordering this mounting type always specify length for the measurement of H cf. above drawing.
Note: This mounting type can only be assembled by Emerson Process Management Marine Solutions, Damcos because it requires special tools. The customer can exchange the MAS2600 transmitter by ordering a G022B085 and a G022B082 together with the new MAS2600 transducer. It must clearly be specified that it is a replacement for an MAS2600
Page 12 of 28
