POWER SOURCE

 

 

 

 

 

 

 

 

 

 

 

 

 

When the bars in the battery indicator (in the display) become low (see

 

 

 

 

 

 

 

 

 

 

 

 

 

figure 1), you can recharge the battery as described on the next page

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

or use the Battery Backup unit, but first install a battery as follows:

Batt Low

Batt Full

 

 

 

 

 

 

 

 

 

 

Figure 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Slide the Battery Backup’s battery

Insert one (1) “AAA” battery as shown. An

compartment as shown. When using the

alkaline battery is recommended for the longest

Battery Backup, make sure to set the Power

playing time. Slide the battery compartment

Input setting to Backup (see page 24).

back on.

BATTERY PRECAUTIONS

Follow these precautions when using a battery in this device:

1. Use only the size and type of battery specified.

2. Be sure to follow the correct polarity when installing the battery as indicated. Reversed batteries may cause damage to the device.

3.If the device is not to be used for a long period of time, remove the battery to prevent damage or injury from possible battery leakage.

4.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

12

Page 13
Image 13
Emerson MP250 owner manual Power Source, You can recharge the battery as described on the next