SPS 4001B
Instruction Manual
PREFACE | The purpose of this manual is to provide information concerning the |
| components, functions, installation and maintenance of the SPS 4001B |
| Single Probe Autocalibration Sequencer. |
| Some sections may describe equipment not used in your configuration. The |
| user should become thoroughly familiar with the operation of this module |
| before operating it. Read this instruction manual completely. |
DEFINITIONS | The following definitions apply to WARNINGS, CAUTIONS, and NOTES |
| found throughout this publication. |
|
|
|
|
|
|
|
|
Highlights an operation or maintenance procedure, practice, condition, statement, etc. If not strictly observed, could result in injury, death, or
Highlights an operation or maintenance procedure, practice, condition, statement, etc. If not strictly observed, could result in damage to or destruction of equipment, or loss of effectiveness.
NOTE
Highlights an essential operating procedure, condition, or statement.
SYMBOLS
: EARTH (GROUND) TERMINAL
: PROTECTIVE CONDUCTOR TERMINAL
: RISK OF ELECTRICAL SHOCK
: WARNING: REFER TO INSTRUCTION BULLETIN
NOTE TO USERS
The number in the lower right corner of each illustration in this publication is a manual illustration number. It is not a part number, and is not related to the illustration in any technical manner.
ii
