Instruction Manual

IM-106-340AC-1, Rev. 1.0 April 2005

SPS 4001B

Table 1-1. Calibration

Components

PART NUMBER

DESCRIPTION

 

1A99119G01

Two disposable calibration gas bottles - 0.4% and 8% O2, balance

 

 

nitrogen - 550 liters each (1) (2)

 

1A99119G02

Two flow regulators for calibration gas bottles

 

1A99119G03

Bottle rack

NOTES

(1)Calibration gas bottles cannot be shipped via airfreight.

(2)When the bottles are used with "CALIBRATION RECOMMENDED" features, the bottles should provide 2 to 3 years of calibrations in normal service.

PHYSICAL DESCRIPTION

The main components of the SPS 4001B are illustrated in Figure 1-2.

Manifold

The manifold provides porting to and from the calibration solenoids. The manifold ports are accessible from outside the enclosure for making piping connections. The Oxymitter 4000 calibration gases are piped into and sequenced through the calibration gas solenoids mounted on the manifold.

Figure 1-2. SPS 4001B Components

CALIBRATION GAS

FLOW METER

REFERENCE AIR

FLOW METER

CIRCUIT

BOARD

REFERENCE

AIR PRESSURE

REGULATOR

PRESSURE

SWITCH

CALIBRATION GAS 1

(LOW CAL GAS)

SOLENOID

 

SOLENOID

37740002

 

CALIBRATION GAS 2

 

MANIFOLD

(HIGH CAL GAS)

 

1-3

Page 9
Image 9
Emerson SPS 4001B instruction manual Physical Description, Manifold