relay is normally | |
Latch Status: | set the latch status of relays on alarm condition |
Latching: | relay latches at alarm condition |
relay does not latch in alarm condition | |
Low Alarm Level: | low alarm relay is activated |
High Alarm Level: | high alarm relay is activated |
Calibration Complete: | calibration completed successfully |
(Applicable only to O2 sensor) | apply ambient air or certified instrument air |
Apply Calibration Air: | |
(Applicable only to O2 sensor) | device is calculating the oxygen level |
20.9: | |
(Applicable only to O2 sensor) | device is measuring the oxygen level |
processing: | |
(Applicable only to O2 sensor) | remove instrument air if applicable |
Remove Calibration Air: |
Ordering Information
32
