Electric Shock Hazard: Using an ungrounded or improperly connected appliance can result in serious injury or death from electrical shock.

This appliance must be grounded. This hot water faucet is equipped with a cord that has a grounding conductor and a grounding pin. The plug must be connected to an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Check with a qualified electrician or serviceman if you are in doubt as to whether the instant hot water dispenser is properly grounded.

Personal Injury: This tank is a non-pressurized tank. DO NOT modify this system.

DO NOT close vent tube or connect other type faucet or valves to the tank. Use only the

InSinkErator faucet supplied. Use only parts provided. Contact an authorized InSinkErator

Service agent for repairs or replacement components.

Fire Hazard: To minimize possibility of fire, DO NOT store flammable items such as rags, paper or aerosol cans near the tank. DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Property Damage: To avoid water damage, replace any loose or split tubing. Periodically inspect the unit for any signs of leakage and immediately remove from service any unit suspected of leaking.

A hot water faucet, like any water heater, has a limited life and will eventually fail. To avoid possible property damage, this hot water faucet should be regularly examined for leakage and replaced when necessary. A drain pan, plumbed to an appropriate drain or outfitted with a leak detector, should be used in those applications where any leakage could cause property damage.

WARRANTY INFORMATION

1-year warranty

Covers all replacement parts and labor to correct defects in material or workmanship in the faucet system, excluding the replaceable filter cartridge, for the full warranty period from the date of installation in your home. If warranty service is required during the warranty period, contact an authorized InSinkErator service agent to replace or repair the unit in your home at no cost to you. If your faucet is replaced rather than repaired, the warranty on the new unit shall be for the duration of the remaining portion of the original dispenser’s warranty.

Note: Warranty is determined by unit serial number and/or date of installation. Purchase or installation receipt may be required to verify warranty status. When service is required, and for the location of your nearest factory authorized service center, call toll free 1-800-558-5700.

The foregoing warranty does not apply to damage or inoperation resulting from accident, alteration, misuse, abuse, improper installation, installation not in accordance with these instructions or local electrical and/or plumbing codes. We do not assume any responsibility for consequential damage. Install using genuine InSinkErator® manufactured components only. Use of non InSinkErator components will void your warranty.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitations of incidental or consequential damages, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

8

Page 7 Page 9
Page 8
Image 8
Emerson UWL owner manual Warranty Information, Service agent for repairs or replacement components
Page 7 Page 9

UW, UWL specifications

Emerson's Ultrasonic Wireless (UW) and Ultrasonic Wireless Level (UWL) technologies are at the forefront of level measurement solutions for various industries. These advanced systems are designed to optimize operations in challenging environments, ensuring high accuracy and reliability in tank level monitoring and other critical applications.

One of the main features of Emerson UW technology is its ability to provide real-time, continuous level measurement without the need for physical contact with the medium being measured. This non-contact approach significantly reduces the risk of contamination and provides a longer lifespan for the equipment. The ultrasonic sensors emit high-frequency sound waves that reflect off the surface of the liquid, allowing for precise distance measurement and, consequently, accurate level readings.

The UWL variant specifically enhances this functionality by integrating wireless communication capabilities. This allows for seamless data transmission to central control systems or cloud-based platforms, facilitating remote monitoring and management. The result is improved operational efficiency, as operators can make informed decisions based on real-time data from anywhere.

Another characteristic that sets Emerson UW and UWL technologies apart is their adaptability to various environmental conditions. The sensors are designed to withstand extreme temperatures and pressures, making them suitable for a wide range of industries, including oil and gas, water and wastewater, and chemicals. Additionally, the devices feature robust housing that protects them from dust, moisture, and other potential contaminants.

Moreover, Emerson's solutions incorporate advanced algorithms that compensate for variables such as temperature fluctuations and vapor or foam on the liquid surface. This enhances measurement accuracy and minimizes the likelihood of erroneous readings, which is crucial in process industries where precise level data is essential for safety and efficiency.

Emerson's commitment to innovation is evident in its ongoing development of these technologies. The integration of IoT capabilities further enhances the functionality of UW and UWL systems, enabling predictive maintenance, trend analysis, and integration with broader asset management strategies. This not only reduces operational costs but also increases the overall safety of the facility.

In conclusion, Emerson's UW and UWL technologies present a robust solution for level measurement, characterized by their non-contact sensing capabilities, wireless communication, and adaptability to harsh environments. As industries continue to evolve, these innovative systems will play a vital role in enhancing efficiency, safety, and operational excellence.
Top Page Image Contents