Emerson user manual Unpacking the Liebert XDCF, Recyclable Packaging, 182713

General product information

2.6Unpacking the Liebert XDCF

The unit is shipped in a protective package. Do not remove the packaging from the Liebert XDCF before it is at the installation location.

•When unpacking and handling the Liebert XDCF, care should be taken to prevent damaging the coils.

•Remove outer packaging when ready to install the Liebert XDCF.

•Do not use unit piping to lift or move the Liebert XDCF.

2.6.1Recyclable Packaging

All material used to package this unit is recyclable. Please save for future use or dispose of the material appropriately.

R

! CAUTION

Risk of sharp edges, splinters and exposed fasteners! Can cause personal injury!

Only properly trained personnel wearing appropriate safety headgear, gloves, shoes and glasses should attempt to move, lift, remove packaging from, or prepare unit for installation.

NOTICE

Risk of unit damage if improperly stored. Keep the unit indoors and protected from dampness, freezing temperatures and contact damage.

Figure 4 Unpacking the Liebert XDCF

3

Unit Ref.

1

3

1

5

2

Coil End	2
Mounting Assembly

4

Notes

1.Area indicated on Item #3 (foam insert) is to be used

for hardware kit and/or unit manuals for shipping to customer.

2.Coil end mounting assembly is to be wrapped in P/N 123783P1 (bubble) and placed into Item #2 (corrugated insert), only when packaging a specified bottom-mount unit.

3.Ref: Use P/N S-6060, or equivalent adhesive, to seal the top and bottom of Item #1 (box) for shipping to the customer.

4.Refer to manufacturing work instructions for any additional

directions regarding packaging of this unit. 182713

5