Mechanical Considerations
3.0MECHANICAL CONSIDERATIONS
The Liebert XDCF is engineered to fit on the rear of the Egenera BladeFrame enclosure. Figure 5, below, illustrates the unit’s dimensions and the location of pipes. Figure 6 shows the attachment positions of each module.
Figure 5 Overall dimensions
|
| TIGHTEN FLEX PIPE |
|
| TO UNIT WITH THE |
| RE TURN | SCHRADE R VALVE |
|
| IN THIS POSITION |
| ONCE FLE X PIPE CONNECTIONS | |
| ARE MADE TO THE UNIT DO NOT | |
| DISASSEMBLE FROM THE UNIT . | |
| REMOVE CONNECTIONS FROM | |
| CEILING HEADERS BY TURNING | |
| THE SUPPLY VALVE TO THE | |
| OFF POSITION AND THEN TURNING | |
| THE RETURN VALVE TO THE OFF | |
| P OSITION THE HEADER |
|
| CONNECTIONS MAY BE REMOVED. | |
| S UPPLY | TIGHTEN FLEX PIPE |
| TO UNIT WITH THE | |
|
| SCHRADE R VALVE |
| 1194311 P1 | IN THIS POSITION |
TOP
(340mm)
(95mm)
(41mm)
Upper unit shown;
both upper and lower units have same dimensions
7/8" (22mm)
Piping is not
XDCF
Return
Pipe
EMERSON
NETWORK POWER
Liebert TM
XD
FRONT
DISCHARGE
SIDE
(768mm)
RIGHT
SIDE
BACK
6