Reference Manual
00809-0100-4808, Rev CA
June 2008
Rosemount 3051N
5-12
ROSEMOUNT 3051N 4-20 MA/HART OUTPUT SMART PRESSURE TRANSMITTERS TYPICAL CONFIGURATION DATA WORKSHEET
CONFIGURATION DATA SHEET
Software Tag: |__|__|__|__|__|__|__|__|
OUTPUT INFORMATION: (Software Selectable)
4 mA = ____________ 0★Key to Symbols
20 mA = ____________ Upper Range Limit ★ ★ = Typical Factory Default Value(1)
Pressure Units = inH2O★(2) psi★(3) Pa ftH2O
inHg bar kPa g/cm2
mbar Torr mmH2O inH2O at 4 °C
Atm kg/cm2mmHg mmH2O at 4 °C
Output = Linear★ Square Root (For DP transmitters only)
Damping(4) = 0.00 seconds 0.05 seconds 0.10 seconds 0.20 seconds 0.40 seconds★
0.80 seconds 1.60 seconds 3.20 seconds 6.4 seconds 12.8 seconds
25.6 seconds
(1) Default values may be different outside the U.S.A. Consult your Rosemount Representative for details.
(2) inH20 for ND/NG Ranges 0, 1, 2, and 3
(3) psi for ND/NG Ranges 4 and 5, all NA ranges.
(4) Rosemount 3051NDO default damping is 3.2 seconds. Rosemount 3051ND1, with calibrations below 2.5 in H2O (0,62 kPa) have damping
set at 3.2 seconds.
TRANSMITTER INFORMATION: (Software Selectable)
Descriptor: |__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|
(16 characters)
Message: |__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|
(32 characters)
Date: □ □/□ □ □/□ □
Day Month Year
Local Span and Zero: Enabled★Disabled
LCD METER CONFIGURATION (Software Adjustable – M5 or M6 option must be specified in Rosemount number)
Meter Display Type:
Eng. Units only Alternate Eng. Units & % of Range ★
% of Range only Alternate Eng. Units & Custom Display
Custom Display only Alternate % of Range & Custom Display
Custom Display Configuration: (must be filled out if Custom Display is selected as meter type)
Decimal Point Position (fixed)
Indicate decimal point location XX
X
XX
Enter Lower Range Value (Decimal point must be in the same position as specified above.)
(circle sign) +–□□□□□ Default is +000.00
Enter Upper Range Value (Decimal point must be in the same position as specified above.)
(circle sign) +–□□□□□ Default is +100.00
Custom Units Available characters: A-Z, 0-9, /, *, %, (blank)
□ □ □ □ □ Default is %RNGE
Custom Display Transfer Function (Independent of Analog Output)
Linear★
Square Root