SPECIFICATIONS
DV25IN33L MODELS | LP | Nat |
Input Btu/hr Maximum | 25,000 | 25,000 |
Btu/hr Minimum | 17,000 | 17,000 |
KWH (Maximum) | 7.30 | 7.30 |
(Minimum) | 5.00 | 5.00 |
Orifice | #53 (0.0596) | #42 (0.0935) |
Air Shutter Opening | Full Open | 1/8” |
DV33IN33L MODELS | LP | Nat |
Input Btu/hr Maximum | 33,000 | 33,000 |
Btu/hr Minimum | 25,000 | 25,000 |
KWH (Maximum) | 9.57 | 9.57 |
(Minimum) | 7.30 | 6.67 |
Orifice | #51 (0.067) | #34 (0.111) |
Air Shutter Opening | Full Open | 3/16” |
DV35IN33L MODELS | LP | Nat |
Input Btu/hr Maximum | 35,000 | 35,000 |
Minimum | 27,000 | 25,000 |
KWH (Maximum) | 10.15 | 10.15 |
(Minimum) | 7.83 | 7.30 |
Orifice | #50 (0.070) | #33 (0.113) |
Air Shutter Opening | Full Open | 3/16” |
Remote Control | Description |
Accessories |
|
FRBC | Millivolt Battery Remote ON/OFF |
FRBTC | Millivolt Battery Remote |
TMV | Millivolt WIRELESS Wall Thermostat |
TRW | Millivolt Reed Switch Wall Thermostat |
Surround Kits | Description |
| Contemporary |
S256BL | 6” Wide, black for use on DV25IN models |
S336BL | 6” Wide, black for use on DV33IN models |
S356BL | 6” Wide, black for use on DV35IN models |
| Traditional Cast Iron |
SC256BL | 6” Wide, black for use on DV25IN models |
SC336BL | 6” Wide, black for use on DV33IN models |
SC356BL | 6” Wide, black for use on DV35IN models |
Venting Kits | Description | Contents |
DVKI | Vertical Vent Kit - 17 1/2’ | One piece of 35’ FlexVent (split for 17 1/2’ vent run), Round Cap, Flashing, |
|
| connectors, and clamps. |
|
| Recommended when installing to an existing round fireplace chimney pipe. |
DVVK3FV | Vertical Vent Kit - 25’ | Two pieces of 25’ FlexVent, Rectangle Cap, Flashing, connectors, and clamps |
|
| Recommended when installing to a square or rectangular clay flue. |
DVK35 | Vent Extension Kit | 35’ flex vent extension section with 2 connectors and 4 clamps |
Note: When installing vent caps, special locally made flashings may be required to properly seal the vent system to the existing chimney termination.
Page 6 |
