IMPORTANT SAFETY INFORMATION

THIS IS A HEATING APPLIANCE

DO NOT OPERATE THIS APPLIANCE WITHOUT OUTER CASING INSTALLED.

Due to high temperatures the appliance should be located

• DONOTputanythingaroundthefurnacethatwillobstruct

out of traffic and away from furniture and draperies.

the flow of combustion and ventilation air.

• Children and adults should be alerted to the hazards of

• DOkeeptheapplianceareaclearandfreefromcombustible

high surface temperatures and should stay away to avoid

material, gasoline and other flammable vapors and

burns or clothing ignition.

liquids.

• Young children should be carefully supervised when they

• DO examine venting system periodically and replace

are in the same room as the appliance.

damaged parts.

• Clothing orotherflammable material should not be placed

• DO make a periodic visual check of pilot and burners.

on or near the appliance.

Clean and replace damaged parts.

• Any safety screen or guard removed for servicing an

• DO NOT use this heater if any part has been under water.

appliance must be replaced prior to operating the

Immediately call a qualified service technician to inspect

appliance.

the heater and to replace any part of the control system

• Keep burner and control compartment clean.

and any gas control which has been under water.

• This furnace must not be connected to a chimney flue

• Installation and repair should be done by a QUALIFIED

serving a separate solid-fuel burning appliance.

SERVICE PERSON. The appliance should be inspected

 

before use and at least annually by a qualified service

 

person. More frequent cleaning may be required due to

 

excessive lint from carpeting, bedding materials, etc. It

 

is imperative that control compartments, burners and

 

circulating air passageways of the appliance be kept

 

clean.

 

 

 

12425-10-1008

Page 3

Page 3
Image 3
Empire Products GWT-35-2(SG, GWT-25-2(SG installation instructions Important Safety Information, This is a Heating Appliance