Empire Products SR-30T-3, SR-18T-3, SR-10T-3 installation instructions Unvented Room Heater

INSTALLATION INSTRUCTIONS

AND

OWNER'S MANUAL

SR-30T SHOWN

Installer: Please leave these instructions with the consumer.

Consumer: Please retain these instructions for future use.

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

—Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

—WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electrical switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.

•If you cannot reach yourgas supplier, call the fire department.

—Installation and service must be performed by a qualified installer, service agency or the gas supplier.

UNVENTED

ROOM HEATER

MODELS

SR-10T-3 SR-18T-3 SR-30T-3

EFFECTIVE DATE

MAY 2004

This is an unvented gas-fired heater. It uses air (oxygen) from the room in which it is installed. Provisions foradequate com- bustion and ventilation air must be pro- vided. Refer to page 6.

WARNING: If not installed, operated and maintained in accordance with the manu- facturer's instructions, this product could expose you to substances in fuel or from fuel combustion which can cause death or serious illness.

WATER VAPOR: A BY-PRODUCT OF UNVENTED ROOM HEATERS Water vapor is a by-product of gas combustion. An unvented room heater produces approximately one (1) ounce (30ml) of water for every 1,000 BTU's (.3KW's) of gas input per hour. Refer to page 6.

16009-1-0504 Page 1